BN-G700
-
■ Features
High Thermal conductivity: 6 W/m·K
Excellent thermal performance
Good reliability
Superior ability to flow and conform to interfaces
Excellent thermal resistance
Non-toxic, non-corrosive
Store at room temperature
■ Benefits
Thermal greases (also called thermal compound or thermal paste) are thermally conductive.
Amongst the various thermal interface materials, thermal greases typically offer better thermal performance, acting as an important role in the thermal management. In addition, thermal contacts made using thermal greases can be reworked, allowing easy repair and upgrade.■ Bornsun’s Thermal Grease (Thermal Compound)
BN-G700 is especially designed for high performance components.
The BN-G700 of low viscosity has the ability to flow and conform to interfaces, providing a path of low thermal resistance between the heat generating devices and the heat spreaders/sinks. This leads to higher effective thermal conductivity, helping to disperse the heat to heat sinks effectively.
Our Thermal Grease Series could be stored at room temperature which reduces customers’ storage costs. At the same time our thermal grease Series pass reliability tests, avoiding dry out phenomenon.■ Typical Application
● Between a semiconductor and heat sink
● Between a CPU and heat sink
● Between a power supply resistor and base
● Thermoelectric cooling device
● Temperature regulator
■Packaging Description
Thermal Grease BN-G700 is available in:
Syringes;
Bulk;
Custom Sizes Available.■ Storage Conditions:
Store at room temperature,
Avoid sunlight exposure
Humidity < 60%.■ Application of thermal grease
● For small volume applications:
Pre-clean heat sink/spreader and component interfaces
Mix well before using
Apply a small drop of thermal grease on the top of the component
Make sure it’s a uniform coating thickness across the thermal substrate
● For large volume applications: silk screening is recommended
Silk Screening:
Place heat sink approximately 2.5 mm under the taut silk screen.
Apply a dollop of thermal grease across one side of the screen.
Run a hard rubber (70 – 80 Shore A) squeegee across the dollop passing across the screen. Turn it over to pass the screened grease a second time with the clean side of the squeegee.
Lift off the screen to reveal the printed grease.
Repeat if necessary.
Remove the stencil to reveal the printed grease.HN-400(导热矽胶布)
Sil-pad is one kind of clean and efficient TIM material for a wide range of electronic components, or between other heat-generating devices and chassis.
Bornsun's R&D center enables us to work closely and provide not only products but also best solution to our clients.
■ ROHS Compliant: Yes
■UL recognized: Yes
■ Features
Thermal conductivity: 1.3 W/m·K
Excellent thermal performance
Low thermal resistance
Non-toxic, non-corrosive
Available in die-cut parts, sheets and rolls
High tensile strength and tear strength
■ Benefits
HN-400 is widely applied on different kinds of electron devices and heat spreaders.
HN-400 has excellent thermal conductivity and flame retardant performance which allows it to be applied on different kinds of surfaces.
Our sil-pad is available in customized die-cut parts, sheets and rolls.
■ Application
Power supply
Electromotor
Semiconductor
Transistor Outline Package -